西門子母線槽Siemens low voltage busbar西門子低壓母線系統是替代電纜配電的經濟、理想型方案As a substitute for the cable distribution system, Siemens low-voltage busbaris the economic, ideal solution!安裝電纜時，新負載線路只能按照傳統方法連接分支配電屏，費用高且安裝復雜。When install cables, the new load lines only in accordancewith traditional connection methods to connect branchdistribution board, costly and complicated to install母線槽的插接單元接近負載設備，現場布局更清晰、靈活，經濟實用。The tap-off units of busbar system are close to the loadingequipments, enjoying clearer site layout, flexible, economicaland practical features.電纜布線復雜，火災荷載高Cable layout is complex, high fire load母線設計簡單清晰，火災荷載低Busbar planning is easy, low fire load西門子低壓母線系統Siemens low voltage trunking system母線槽系統主要作為變壓器與配電柜之間的輸電設備以及配電柜與負載之間的配電設備而被廣泛使用，與電纜相比，母線槽系統不但，而且壽命長、性能可靠、使用方便。西門子低壓母線槽產品主要有以下幾種類型 ：As the power distribution equipment between transformerand switchgear, between switchgear and loadingequipments, busbar trunking system is widely applyed. Suchsystem is more safe, long life-span, reliable and convenient tooperate over cable installation.Siemens Busbar Trunking Systems mainly offers the busbartrunking systems as the following types:XL-II系統 額定電流400A~6300A用于變壓器低壓側到總低壓柜LR系統 額定電流630A~6300ALD系統 額定電流1000A~5000ABD1系統 額定電流140A~700A 用于樓層干線系統西門子母線槽系統電流覆蓋面廣，產品種類齊全，能滿足不同用戶和工程項目的需求。所有母線槽系統均執行國際先進標準，并通過了國內外機構的各項檢測與認證，如德國波恩實驗室認證、英國ASTA、CCC認證等，這樣就為產品的性能提供了保證。